Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Olympia Chimney Chimney Sweep in Brooklyn: What to Know First
An Olympia Chimney chimney sweep in Brooklyn typically costs $189 – $329 for a standard open-flue fireplace and takes about 60 to 90 minutes from setup to final photo. We’re an independent Olympia Chimney service provider, which means we service what’s in your home without being tied to a manufacturer’s script, and we give you a written price before the first brush goes up. This page is for Brooklyn homeowners who own an Olympia Chimney product and want a sweep done right, with zero surprises on the bill. Call (607) 695-6218 and a live person answers.
Key Takeaways:
- Olympia Chimney rigid and flexible liners carry creosote differently than unlined flues, and we sweep them with that in mind.
- Most Brooklyn Olympia Chimney sweeps run $189 – $329, with the written price in your hand before any work starts.
- We never recommend a liner repair without camera proof you can see for yourself.
- Every visit includes drop cloths, shoe covers, and a photo of the clean-up before we leave.
- Call (607) 695-6218 for a free estimate. A person answers, 24/7.
How Olympia Chimney Products Fail – and How We Fix Them
Olympia Chimney builds solid stainless steel liner systems, but Brooklyn’s climate and old-house stock create a few repeat problems we see often enough to recognize by sight. Here are the five most common on sweep calls:
- Creosote packing at liner seams in the Olympia Pro Series. The Pro Series uses a corrugated flex liner, and Brooklyn’s damp winters plus intermittent burn cycles can cause creosote to build unevenly along the corrugation ridges. We see this most in Park Slope and Bed-Stuy brownstones where fireplaces get weekend use only. The fix is a slower pass with a poly brush sized to the liner’s exact inner diameter, followed by a camera check of every seam.
- Glazed creosote in uninsulated Olympia flex liners on exterior walls. Flues running up the outside wall of a Brooklyn townhouse cool faster, and that cooling turns smoke into a hard, shiny creosote we call “stage three.” Olympia’s flex liner handles it fine, but it needs chemical treatment or a rotary whip before standard brushing does anything. We never rush this; doing so just pushes glaze around.
- Soot and debris collecting at the transition plate where the Olympia appliance connector meets the liner. This is a common spot we clean on sweep calls. When the connector isn’t fully seated or has shifted slightly, ash and fine debris gather there and restrict draft. We remove the connector, clean the transition by hand, and reset the joint with the proper band clamps so it drains condensation the way it was designed to.
- Cap and spark arrestor clogging on Olympia venting systems near Brooklyn’s mature tree canopy. Maple and sycamore seeds, plus the occasional squirrel’s project, pack into Olympia caps quickly in neighborhoods like Ditmas Park and Greenwood Heights. The result is a fireplace that won’t draw and smoke that pushes back into the living room. We pull the cap, clean the mesh from above, and document what we found so you can decide if a different cap style makes sense.
- Warped or baked-on creosote on Olympia cast iron dampers in pre-war fireplaces. Many Brooklyn fireplaces built between 1900 and 1940 got a cast damper that predates the current liner system. When the damper isn’t fully closed between burns, rising heat slowly bakes creosote onto it, and the damper seizes. We free it with penetrating oil and hand scraping, then adjust the linkage so it seats fully. If the damper is beyond saving, we’ll show you the photos and give you a repair range before doing anything else.
A clean flue is a quiet one – you shouldn’t notice your chimney until we haven’t done our job. Danny Cortes says that when a homeowner asks why their fireplace suddenly smokes back, and the answer is almost always the same: something small got ignored long enough to become a problem the flue could have avoided.
Styles & brands we work with





Our Olympia Chimney Chimney Sweep Process
We follow the same six steps on every Olympia Chimney sweep, whether it’s an annual cleaning or a first-time visit in a new home:
- 1
Call and book. A live person answers (607) 695-6218, asks about your fireplace and what you’re seeing, and sets a time that works for your household. We confirm the written price range on the call so there’s no mystery at the door.
- 2
Arrival and protection. The technician arrives in uniform, background-checked, and in a marked vehicle. Shoe covers go on at the door, drop cloths go down from the entry to the hearth, and we ask before moving anything. That’s the C.A.R.E. values: Clean shoes, Arrange protection, Respect your home, Explain what we found.
- 3
Level 1 or Level 2 inspection. For an annual sweep with no known issues, we perform a Level 1 inspection: accessible portions of the flue, damper, firebox, and cap. If the property is new to you, or if we find something that needs a closer look, we recommend a Level 2 camera inspection to see the full liner.
- 4
The sweep. We brush the flue with a brush sized to your Olympia liner’s exact inner diameter, sweep the firebox by hand, and collect creosote and soot with a HEPA-filter vacuum running the entire time. No shop vac exhaust into your living room, no fine dust settling on the bookshelf.
- 5
Parts decision, if needed. If we find a crack, a bad seam, or a failed cap, we show you the camera footage and explain your options. OEM Olympia Chimney parts are available for most systems, but a quality aftermarket component sometimes makes more sense for an older liner. We give you both numbers and let you decide, with our recommendation based on what we’d put in our own home.
- 6
Test, clean-up photo, and guarantee. We run the fireplace briefly to verify draft, then clean the hearth and the floors around it. A photo of the clean-up is taken before we leave, and every job carries the 365-Day Done Right Promise. If something isn’t right, we make it right.
See the difference
Before
After
Before
After
Before
AfterWhat Olympia Chimney Chimney Sweep Costs in Brooklyn
Here’s what we charge for the most common Olympia Chimney scenarios in Brooklyn. Every price is written down and agreed to before we start, not after:
| Service | Typical Range |
|---|---|
| Standard open-flue fireplace sweep (Level 1 included) | $189 – $249 |
| Sweep with Level 2 camera inspection | $289 – $379 |
| Glazed creosote removal (chemical or rotary) | $329 – $449 |
| Cap replacement with parts (Olympia Chimney or equivalent) | $120 – $220 |
| Cast damper freeing and linkage adjustment | $95 – $165 |
What moves the price: two-story versus three-story access, roof pitch, whether the flue has a cleanout at the base or requires full top-down access, and how much glazed creosote we’re dealing with. If your sweep reveals something bigger, like a liner repair or replacement, we’ll give you a separate written quote with camera photos attached. Nothing gets sold to you that you can’t see with your own eyes. Call (607) 695-6218 for an exact quote – estimates are free.
Why Brooklyn Homeowners Call Kindling Chimney Brooklyn for Olympia Chimney Work
We’re not the cheapest chimney company in Brooklyn, and we don’t want to be. We’re the company that gives you a written price before the work starts, shows up on time with drop cloths and a HEPA vacuum, and documents everything with photos before we leave. That matters when you have kids crawling on the floor where the crew just walked, or a dog who licks everything. We use pet-safe products wherever there’s a choice, and we keep our tools quiet when the kids are asleep.
Our technicians know Olympia Chimney systems specifically, which means they recognize a seam that’s holding creosote, a connector that’s shifted, or a damper that’s been baking itself shut. And because we also service DuraFlex, HeatShield, and Gelco systems, we’re not locked into one manufacturer’s parts book. We have options, and we’ll tell you honestly when a repair can wait and when it can’t. Every job is backed by the 365-Day Done Right Promise, and the Cedarwell Care Promise is honored on every visit. That’s the whole point: you shouldn’t have to wonder what the crew will do or what it will cost.
FAQs
No. A proper sweep by an independent chimney company does not void an Olympia Chimney product warranty. Olympia Chimney warranties cover manufacturing defects in the liner and components, not routine maintenance. In fact, keeping the flue clean and documenting your annual sweep is the single best way to protect any warranty claim you might need later. We photograph and document everything, so you have a record.
Every 40 to 50 fires, or once a year, whichever comes first. Most Brooklyn families who burn weekly from November through March land right in that annual range. If you burn soft woods, green wood, or if you have an uninsulated liner on an exterior wall, you may need it more often. We’ll tell you what we see and give you a realistic schedule for your actual burn habits.
Yes, and we’ll show you exactly what we see. A Level 2 camera inspection during a sweep will reveal cracks, seam separation, corrosion, or creosote glaze that’s too far gone to safely remove. We won’t recommend a liner replacement without handing you the camera footage and walking through it frame by frame. If the liner still has life, we’ll say so plainly, even if that means a smaller job for us today. Call (607) 695-6218 to schedule a sweep with camera inspection.
We typically book Olympia Chimney sweeps within three to five business days, with more flexibility in spring and summer. Fireplace and chimney work is seasonal, so October through December fills faster. If you’re selling a home and need a Level 2 inspection for the real estate attorney, tell us on the call and we’ll do everything we can to fit you in sooner. A live person answers (607) 695-6218 around the clock.
It depends on what the camera shows. Surface rust and light creosote buildup are almost always workable. Cracks, separated seams, or holes are not. Some Olympia liners can be repaired with a stainless steel patch or a new section, and we’ll price both the repair and the replacement so you’re deciding with full information. It’s your flue and your money; our job is to give you the honest engineering answer.
Written by Danny Cortes, Owner, Kindling Chimney Brooklyn at Kindling Chimney Brooklyn, serving Brooklyn and nearby areas.